Nobody makes it. Somebody will. › Categories › Sport & Outdoor
An e-bike rider asks why drivetrain makers do not sell wider, tougher sprockets and chainrings built for mid-drive motors, which put 80 to 90 Nm through the chain. Replies blamed weight and cost; e-bike chains exist, but no reply named matching cassettes or chainrings.
A mountain biker wants an electric dropper seatpost with a second motor that tilts the saddle, nose down for climbs and level for descents.
A wireless electronic dropper post that draws power from the e-bike's main battery, so it never needs its own small battery charged.
A wireless derailleur that mounts on the universal derailleur hanger but works with ordinary 10, 11 and 12-speed cassettes, in several cage lengths, instead of only the newest groupsets.
A small case that mounts on the bike and holds folding reading glasses, so riders who need them for a computer or map can carry them safely.
A bicycle saddle whose rails can be replaced after a crash, offered in a wider shape as well. The poster cites one dropper-post maker's approach as the model.
A sealed case under the top tube holding a CO2 cartridge, a compact inner tube and a mini tool, quick to open on the trail. The one product that did this has been discontinued.
Riders carry a spare battery for wireless shifting in a small holder. The request is a holder with space for a CR2032 coin cell as well, for the shifters.
A dual-crown suspension fork with only 100 mm of travel for cross-country bikes, combining the stiffness of a downhill-style fork with short travel.
An owner of a first-generation Aerospoke front wheel lost one axle end cap and would pay for a copy, since no replacement is sold.
Speedplay Frog pedals are no longer made, and riders who still use them cannot buy new cleats or retention rings.
Replacement and boost-conversion spacers for wheels from Mavic, Novatec and Roval, where original spacers cannot be bought separately.
A conversion kit that lets an older 135 mm Chris King rear hub fit a modern boost-spacing frame. The poster could not find one.
A steel bar linking the rear dropout to the brake boss so a disc caliper can be fitted to a frame built for rim brakes. Earlier adaptors of this kind are rare or discontinued.
Short cranks for children's bikes with a modern spindle interface instead of square taper, and a mount for an ordinary narrow-wide chainring.
Durable steel outer chainrings that fit road cranks with the asymmetric 110 mm bolt pattern, where only lighter aluminium rings are sold.
Stainless steel narrow-wide rear cogs for single-speed bikes at a price close to cheap imported steel cogs.
An internal gear hub with a range of about 500 percent but fewer than 14 gears, so it is lighter and has less drag than the hubs now sold.
A commuter wants bullhorn handlebars over 500 mm wide that fit mountain-bike stems and controls. The closest product the poster found was slightly too narrow.
A case that protects a bike on a flight and then folds or splits into panniers for the ride, so nothing has to be left at the airport.
A bladder and backpack designed together so the reservoir can be refilled and drained without pulling it out of a full pack.
A hiker asks for a hard bear canister that weighs less than a pound yet holds a week of food for Sierra Nevada trips. A reply suggested combining a soft bear-resistant bag with a rigid lid.
A real camp chair that weighs under 8 ounces (about 230 g). A related wish in the same thread: a sleeping pad that converts to a chair and still weighs less than a metal folding chair.
Closed-cell foam pads with puzzle-shaped edges that join into one surface, so several pads cover a whole tent floor, possibly sold together with a tent.
Inflatable pads, insulated or not, cut to the buyer's own dimensions. A small maker used to offer this, and several members say nobody does now.
A short inflatable pad that is wide rather than narrow, around 10 ounces. Members note most short pads are only 18 inches wide.
A down sleeping bag built to go through a home washing machine and dryer without the down clumping or the shell failing.
A rain hat with a waterproof-breathable crown, a brim of about 4 inches, little insulation and a smooth chin strap, in sizes S to XXL, ventilated as well as a mesh sun hat.
Couplers that join two sleeping pads side by side without a gap. The poster says existing coupler straps weigh over 2 ounces.
Backpacks, sleeping bags and sleeping pads for people larger than the usual US 12-14 size range.